|LVS™ Male Sizing Chart|
|Measurement in inches|
|Standard Cut Chest Width||A||9||9.75||9.75||10.75||10.75||11.5||11.5||12.125|
|Standard Cut Waist Width||B||17||17.75||17.75||18.5||18.5||19.25||19.25||20|
|Standard Cut Front Length||C||12||12.75||14.25||13.5||15||14.25||15.75||15|
|Patrol Cut Chest Width||D||7.75||8.5||8.5||9.25||9.25||10||10||10.75|
|Patrol Cut Waist Width||E||17||17.75||17.75||18.5||18.5||19.25||19.25||20|
|Patrol Cut Front Length||F||11.75||12.5||14||13.25||14.75||14||15.5||14.75|
|Back Top Width||G||9.75||10.5||10.5||11.25||11.25||12||12||13|
|Back Waist Width||H||16||16.75||16.75||17.5||17.5||18.25||18.25||19|
|GENERALIZED SIZING GUIDELINES||SM||MD||MDL||LG||LGL||XL||XLL||2X|
|CHEST IN INCHES||33-37||37-41||37-41||41-45||41-45||45-49||45-49||49-53|
|WEIGHT IN LBS. (standard cut)||3.9||4.2||4.5||4.7||5||5.2||5.4||5.7|
NOTES: 6X6 AND 6X9 Side Armor is available for additional side protection. Please see LVS™ 6X6/6X9 user manual for proper set up.
RECOMMENDATIONS FOR CHOOSING CORRECT VEST SIZE:
Locate Chest Width row A (for standard cut) or row D (for patrol cut). This is your chest coverage width.
Locate Waist width row B (for standard cut) or row E (for patrol cut), and Row H (for the back). Add these two numbers together. This is your mid abdominal coverage. Example: mid abominal coverage for standard cut medium = 34.5 (17.75 + 16.75)
If your measurements are larger than waist width measurements of vest (front and back combinded) and you desire complete coverage - 6x6 and 6x9 side armor is available.
Locate Front and Back Length, row C (for standard cut) or row F (for patrol cut), and row I (for the back). This is your coverage for front and back length.
HOW TO MEASURE:
Measure under arms and around fullest part of chest at front. Relax arms at sides while keeping tape parallel with floor.
Bend to one side to find natural indentation in torso. This is the natural waist. Run tape around natural waistline, keeping tape parallel with floor and one finger between body and tape for a more comfortable fit.
CENTER FRONT LENGTH
Measure from the clavicle notch to duty belt. (Take a sitting and standing measurement)
CENTER BACK LENGTH
Measure from the base of the neck (C7) to duty belt. (This is only a check measurement, typically back is approx 1.5" -2" longer than Center Front Length.)